Model NO.:YFT-C Couple
Type:Test and Measurement Instruments
Technical performance and feature:
1. YFT-C type hydraulic valve test bench suitable for DN15-50mm flange, welding and threaded valve test.
2. Claws clamp part and impaciton cylinder parts are separated.
3. Test medium can be choosing by user, water, air or kerosene.
4. Test bench has low pressure water pump and water booster. There is an air connection reserved for air pump.
5. Water and hydraulic oil cycle use.
6. The test bench has an automatic oil pressure discharge system. When using it, the high pressure condition and the relief pressure condition can be changed by itself. So it can reduce oil temperature, elongate life of test bench.
|Allowable test nomial diameter (mm)||DN15-50|
|Test valve face diameter(mm)||130-250|
|Claws clamp part||Allowable flange end of test valve||Max. od/thickness(mm)||195/28|
|Moving bracket horizontal distance (mm)||105-480|
|Clamp part||Axial stroke(mm)||32|
|Cylinder impaction part||Available betweenpandles(mm)||80-480|
|Max. pressure of the water pump supply(MPa)||320|
|Hydraulic system||Rated pressure of oil pump (MPa)||31.5|
|High pressure(increase pressure(MPa)||31.5|