Type:Compression Testing Machine
Load Way:Mechanical Load
Transport Package:Wooden Case
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
|Medium||Water,gas,glycol kinds of chemicals|
|High pressure gauge||0~2000bar|
|Needle valve||412bar~2000bar(it's customize)|
|Air compressor||N/A(it's customize)|