Home > News > Content

Hydrostatic Pipe Tester-Plastic Pipe Hydraulic Pressure Testing Machine (XGNB-6W)

May 12, 2017

Product Detail

Basic Info

  • Model NO.:XGNB-6W

  • Product Type:PE Water-supply Pipes

  • Automation:Automatic

  • Computerized:Computerized

  • Certification:CE, SGS, ISO9001:2008, UL, QS, GMP

  • Customized:Customized

  • Condition:New

  • Trademark:jingmi

Product Description

Technical specification
1. Working pressure: 0-10MPa
2. Testing station: 30 stations
3. Pressure control accuracy: -+1%(Maximum-+0.001 MPa)
4. The pressure value resolution: 0.001 MPa
5. Constant temperature water temperature range: 20 -95 Degree
6. Temperature uniformity: -+1Degree
7. Timer display accuracy: 1s
8. Without the computer, the data can be saved for 8760 hours.
9. The control parameters(pressure time, accuracy)can be input from the micro-control unit at the testing machine or from computer.
10. Power supply: Three phases, suitable for both 380VAC and 220VAC.
11. The machine and the computer can separately or simultaneously display the time (Max. 9999hours 59 minutes 59 seconds)and the pressure(three figures after the point)and eight testing condition(Pressure up, pressure down, pressure compensate, running, end, leakage and exploding ). When the pressure overload, end, leakage and explode take place simultaneously, there is light and voice alarm.
12. The machine has the following function: Observe, analysis, inquire, save, print, testing curve(pressure-time)and starting time, setting time, current time, valid time, invalid time, remaining time, over pressure time, pressure compensating time and etc.

Accord standard: ISO9080/ISO1167/ASTMD1598/ASTM D1785 /EN921
1. Main configuration
(1) Precise pressure micro-control unit: One piece per station, total three pieces
(2) Import control pressure electronic valve( Germany ): 3 pieces per station, total nine pieces
(3) Import Pressure station(From USA ): 1set total one set
(4) Circular pump ( Denmark ): One set total one set
(5) Precision sensors(spaceflight department): One piece per station total three pieces

2. Temperature control system(20 -95D): 1 set

3. Φ450 constant temperature medium tank(inner wall is stainless steel) 1 unit (inner size: 800mm * 800mm * 1600mm, the maximum testing diameter: 450mm )

4. Grips(unit: In ): 1/2 3/4 1 4 5 6 8 10 12

5. Whole set of English version control software and adapter for Windows system.
(1) Mainframe: One set
(2) Water tank: 0.8m* 0.8m * 1.6m one set
(3) Temperature control system: 20 _ 95 one set

Chengde Precision Testing Machine Co., Ltd. is one of the top-ranking manufacturers and supplier of static tension and/or compression materials testing machinery. Our machinery are designed for use in Research and Quality Control to measure materials strength and performance.

? Contact Now