Home > News > Content

Electro Hydraulic Building Materials Pressure Testing Machine (HZ-006)

Apr 22, 2017
Basic Info
  • Model NO.: HZ-006

  • Maxcapacity: Max Testing Force:302 Kn

  • Load Way: Mechanical Load

  • Display: Digital

  • Weight: 1000-2000Kg

  • Oil Cylinder Position: Under

  • Test Force Measuring Range Kn: 4%-100%Fs

  • Hydraulic Pump Rated Pressure: 27mpa

  • Piston Diameter: 130mm

  • Motor Power: 3 Phase 0.75 Kw

  • Net Weight: 400kg

  • Transport Package: Wooden Case

  • Origin: China

  • Type: Universal Testing Machine

  • Accuracy Grade: 0.5

  • Loading Method: Dynamic Load

  • Control: Manual Control

  • Power Source: AC380V

  • Max Load Kn: 100kn/300kn/302kn

  • Test Force Resolution: 0.01kn

  • Resist Bending Roll Diameter: 32mm

  • Piston Stroke: 80mm

  • Outside Dimension Mm: 850*620*1340mm

  • Trademark: lixian

  • Specification: CE/RoHS/ISO/UL

  • HS Code: 9024101000

Product Description
Electro Hydraulic Building Materials Pressure Testing Machine (HZ-006)

The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test, can also be used to test the mechanical properties of other materials.

Hydraulic System:
The oil tank is sucked through the filter screen and be inhaled pump oil, through the petroleum pipeline of oil pump transport to oil valve, When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.

Control system:
This machine adopts hydraulic loading, electronic measuring, with a load of figures, the loading rate shows that the maximum load to maintain, as well as overload protection and power data retention and other functions.

Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.

Whole set fixtures include: A set compression platen fixture
Max load KN100kN(resist
302kN(resist bend and compress)
Test force measuring range KN4%-100%FS
Test Force showed the relative error≤indicating value±1%
Test Force Resolution     0.01kN
Hydraulic pump rated pressure 27MPa
Bearing compress plate size155mm
Maximum distance between the upper and lower plate230mm
Resist bending roll diameter32mm
Maximum distance between the upper and lower resist bending rollers165mm
between two bending rollers upon the center distance 150mm
between two bending rollers under the center distance 450mm
Piston diameter130mm
Piston stroke 80mm
Motor Power 3 phase 0.75 kW
Outside dimension mm850×620×1340mm
Net weight400Kg