Type:Hydraulic Test Pump
Model 4D-SY(6.3_80MPa) electric hydraulic test pump is mainly used in hydrostatic test for various pressure containers, oxygen cylinder, pipe, valve and steam boiler. It is a device in the new technology of processing and high pressure source for liquids in the lab.
The device is specially designed with clean water and emulsion livid of 5-60 degree and oil of viscosity no more than 45 mm2/s as the working media. The liquid is filled up quickly and pressure goes higher immediately when doing the testing initially. It is to reduce the testing time, has great flow volume. When the pressure is over 1.6Mpa (the pressure can be automatically adjusted lower), the flow volume is automatically reduced in order to keep the testing slow and stable. Thus the product has two flow volumes under high and low pressure, and it changes automatically. Any kind of pressure testing can be performed under the rated pressure output. Its working temperature is 5-60 degree.
II. Technical Parameters
The series hydraulic test pump has seven models and its basic parameters are shown in Table 1. When selecting the hydraulic test pump, the rated pressure should be chosen based on the testing pressure needed. The flow requirement shall also be considered.
MODEL rated exhaust pressure MPa Flux L/h Plunger Diameter Reciprocating time mating Motor powder KW Overall Size LxWxH(mm) Weight Kg
High Pressure Low pressure High pressure Low pressure
4D-SY160/6.3 6.3 160 530 32 45 51 1.1 1.1 1.1 3 815× 480× 1055 215
4D-SY100/10 10 100 450 25
4D-SY63/16 16 63 400 20
4D-SY40/25 25 40 380 16
4D-SY35/35 35 35 370 15 1.5
4D-SY30/40 40 30 360 14 1.5
1.52.2 840× 480× 1055
4D-SY22/63 63 22 340 12
4D-SY16/80 80 16 340 10