Air Booster Pump With Max 40 Bar Pressure

Air booster pump with max 40 bar pressure Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported...

Product Details

Air booster pump with max 40 bar pressure

Suncenter  DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high-quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

 

图片1 

* technical parameters

Driven source: clean compressed air

Air pressure control system

Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)

Boost Ratio:2:1

Maximum flow rate : 580L/min

Maximum air output pressure: 16bar.

Applicable medium: clean air

Air inlet minimum pressure: 1bar

Suncenter  DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

 

image 

* technical parameters

Driven source: clean compressed air

Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)

Boost Ratio:2:1

Maximum flow rate : 1600L/min

Maximum air output pressure: 16bar.

Applicable medium: clean air

Air inlet minimum pressure: 1bar

 

Suncenter  DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high-quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.


image 

* technical parameters

Driven source: clean compressed air

Air pressure control system

Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)

Boost Ratio:3:1

Maximum flow rate : 420L/min

Maximum air output pressure: 24bar.

Applicable medium: clean air

Air inlet minimum pressure: 1bar

 

 

Suncenter  DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high-quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

 

image 

* technical parameters

Driven source: clean compressed air

Air pressure control system

Drive compressed air pressure: 2-8bar (recommended drive pressure <8bar)

Boost Ratio:5:1

Maximum flow rate : 820L/min

Maximum air output pressure: 40bar.

Applicable medium: clean air

Air inlet minimum pressure: 2bar

 

Characteristics :

It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, lightweight, simple operation, reliable performance, and wide application range.

 

 

Model

Pressure boost

ratio

Max. air

outlet pressure 

Formula to

calculate air outlet pressure PB

Connection:

(NPT thread)

Max. flow rate (L/min)

DGMA02

2:1

16 bar

2XPL

3/8 / 3/8

580

DGVA02

2:1

16 bar

2XPL

3/8 / 3/8

1600

DGMA03

3:1

24 bar

3XPL

1/2 / 1/2

420

DGVA05

5:1

40 bar

5XPL

1/2 / 1/2

820


Technical specification

  

DGS-DGMA02 air pressure booster system

The system including DGMA02 air booster pump,

F.R.L combination (adjust driven air pressure+ filter+ lubricant)

Air tank (20L/40L), Driven air switch, high-pressure needle valve,

high-pressure gauge, reducing valve

 

image 

 

DGS-DGVA02 air pressure booster system

The system including DGVA02 air booster pump,

F.R.L combination (adjust driven air pressure+ filter+ lubricant)

Air tank (20L/40L), Driven air switch, high-pressure needle valve,

high-pressure gauge, reducing valve

 

 

image 

DGS-DGVA05 air pressure booster system

The system including DGVA05 air booster pump,

F.R.L combination (adjust driven air pressure+ filter+ lubricant)

Air tank (20L/40L), Driven air switch, high-pressure needle valve,

high-pressure gauge, reducing valve

 

 image

 

Model

Pressure boost

ratio

Max. air

outlet pressure 

Formula to

calculate air outlet pressure PB

Connection:

(NPT thread)

Max. flow rate (L/min)

DGS-DGMA02

2:1

16 bar

2XPL

3/8 / 3/8

580

DGS-DGVA02

2:1

16 bar

2XPL

3/8 / 3/8

1600

DGS-DGMA03

3:1

24 bar

3XPL

1/2 / 1/2

420

DGS-DGVA05

5:1

40 bar

5XPL

1/2 / 1/2

820

Technical specifications for the air booster system

Inquiry